Description

ONE Model: SESM-6536-4866-F/D-NS Tabletop Lift 

This Smitty’s Pre-Designed Table Lift has:

• 6-1/2-inch Diameter Hydraulic Cylinder Piston

• 36 Inch rise height

• 2,500 Pound Lifting Capacity

• 48″ X 66″ Smooth Steel Plate Top

• No Non-Rotator (so the table can be turned) Smooth

• Semi-Hydraulic Lifting & Lowering Operation

• Uses your Shops Air Compressor for Operation

• The Hydraulic Cylinder Casing is fiberglass coated to protect from outside corrosion

• The lifting platform sits flat on the floor, so the lift is “basically out of the way” when not in use.

ALLOW 8 – 12 WEEKS PRODUCTION TIME.

This Small Equipment Shop Maintenance Lift (SESML) is popular with mechanics who work on golf carts & Turf Maintenance Equipment, ATVs, Lawn Tractors, Motorcycles, Snowmobiles or any other equipment that needs to be raised for servicing in any type of shop.  Installation of this Small Equipment Shop Maintenance lift is simple and takes little time when you have the proper equipment on hand.  Just four installation steps: •Simply saw through concrete. •Auger hole for cylinder. •Place cylinder in hole. •Drill holes, anchor down, and add fluid. •Install Lifting Structure and take full advantage of your cool time-saving tool. That process puts your lift into service and usually takes just a few hours to accomplish.

These great lifts are 100% American Made in Illinois by a Family Owned and Operated Company. 

Email Smitty@SmittysEquipmentSales.com TO GET QUOTE ON YOUR SPECIFIC LIFT TABLE AND CYLINDER SPECIFICATIONS 

This Small Equipment Shop Maintenance Lift (SESML) is popular with mechanics who work on golf carts & Turf Maintenance Equipment, ATVs, Lawn Tractors, Motorcycles, Snowmobiles or any other equipment that needs to be raised for servicing in any type of shop.  Installation of the Small Equipment Shop Maintenance lift is simple and takes little time when you have the proper equipment on hand.  Just four installation steps: •Simply saw through concrete. •Auger hole for cylinder. •Place cylinder in hole. •Drill holes, anchor down, and add fluid. •Install Lifting Structure and take full advantage of your cool time-saving tool. That process puts your lift into service and usually takes just a few hours to accomplish. These 5-1/2, 6-1/2, 7-1/2, 8-1/2, 10-5/8 or 12-5/8 diameter piston semi-hydraulic lifts do not require a tank and are available in multiple stroke lengths so you can have additional lifting height if you want. They come with optional “larger or smaller” sized square, rectangular or round platforms and customized lifting structures, depending on your needs. The overall design is very low cost compared to others on the market.

These great lifts are 100% American Made In DeKalb, Illinois by SVI, a Family Owned and Operated Company. 

The Hydraulic Cylinder Casings are fiberglass coated to protect casing from outside corrosion and the lifting platform sits flat on the floor so the lift is basically out of the way when not in use. Many owners park equipment right over the lift so you’re not eating up valuable shop space. You can purchase your lift with an optional safety leg if you want, and these lifts are available with full 360-degree rotation so that equipment being serviced can be turned while in the raised position if you want. Some Customers use this style lift to load and unload pickup truck beds in their Shipping Department because the 2500 lb. capacity rating makes it possible to transfer and access heavy loads, and that’s an important safety feature for your business. They can be custom built with “high lift” features if needed. Its primary use of course is working on the small equipment you use for business or recreation. The best in ingenuity & simplicity was applied to make this lift functional, affordable & flexible in its uses.